1/2″ Purple Incandescent Rope Lights

These purple rope lights are the color of Amethyst sparkling in the sun.

Customers use these for:

• Christmas yard displays
• wrapped around trees
• along haunted houses
• winding along park walkways
• lighting sailboats and campers

Easy to assemble, these rope lights will give you the professional results you are looking for. All of our 2-wire rope lights can be cut between cut marks that are located every 36 inches. (In other words, you can’t cut them any shorter than 36 inches and your longer ropes will have to be in multiples of 36 inches.)

The connections in the rope are “floating” and can be cut only at cut marks located every 36 inches. Note that there is a limit to how tightly you can wind the rope around poles and columns. If a section of rope light should fail, splice connectors are included with each spool to allow you to replace that section.

Each spool of rope light comes with an installed power cord. If you are installing a full 150-foot length of rope light, everything will be ready to go. In addition to the built-in plug, each spool contains the following accessories:

• 3 additional power cords with built-in power connectors
• 3 splice connector tubes
• 6 pin connectors for the splice connector tubes
• 3 tubes super glue
• 3 power pin connectors